Parker PV2R3-125 PV2 Series Pump

Frame Size:50; Special Coating:STANDARD PAINT; Screw Treatment:STAINLESS STEEL; Take-Up Frame Travel:18.0000 in; Brand:Baldor-Dodge; UPC:782475434848; Angle Size:3 X 3 X 1/2; Take-Up Frame Style:LIGHT DUTY; Ship Weight:59 LB; Material Type:CARBON STEEL;

Snap Ring:No; Rolling Element:Ball Bearing; Dynamic load, C:21.2 kN; Internal Clearance:C3-Loose; Brand:NTN; Inventory:0.0; Keyword String:Ball; Characteristic cage frequency, FTF:0.37 Hz; Bore:0.984 Inch | 25 Mill; Inner Race Width:0 Inch | 0 Millimete;

H2:70 mm; H1:14.5 mm; Z:16.5 mm; N1:19 mm; T min.:-20 °C; d:25.4 mm; L1:39 mm; Weight:0.66 kg; B:27 mm; Designation of bearing:US205-16G2T20;

Ship Weight:2.2 LB; Bearing Series:206 Series; Bearing Locking Device:Setscrew; Housing Type:2 Bolt Pillow Block; Bearing Inner Ring Material:Steel; Anti-Rotation Pin:Yes; Flinger Type:None; Seal Type:Single Lip; Bearing Outer Ring Material:Steel; d:1.2500 in;

A:36 mm; L:118 mm; d:35 mm; S:8.5 mm; Designation of open end cover:SCO207-35; Dz:80 mm; B:32 mm; C0:15.2 kN; Designation of housing:FE207N-; G:R1/8";

N:29mm; A:49 mm; L2:16 mm; B:30.2 mm; T min.:-20 °C; N2:49 mm; C:35.1 kN; d1:67.2 mm; S:11 mm; Recommended tightening torque for set screw:11.5 Nm;

d:50 mm; Dz:100 mm; H2:115 mm; C0:23.2 kN; Recommended tightening torque for set screw:11.5 Nm; T min.:-20 °C; Weight:2.78 kg; G:R1/8"; S:10.9 mm; Z:76.1 mm;

B:30.2 mm; T max.:200 °C; A:40 mm; N:16mm; d:47.62 mm; B1:43.7 mm; A2:54.7 mm; S:11 mm; Designation of bearing:ES210-30G2T20; e:22 mm;

Characteristic outer ring frequency, BPF0:3.61 Hz; d:40 mm; Brand:SNR; d1:50.3 mm; Mass:0.37 kg; Nref:9,300 rpm; Characteristic inner ring frequency, BPFI:5.39 Hz; Da max:73.5 mm; B:18 mm; Fatigue limit load, Cu:0.81 kN;

Designation of housing:F319-; B:93.7 mm; Weight:22.8 kg; A1:30 mm; T max.:200 °C; Designation of bearing:EX319G2T20; C0:122 kN; A:94 mm; S:46.8 mm; N:35mm;

T min.:-20 °C; Designation of housing:FLE213-; T max.:100 °C; N:21mm; e:34 mm; A2:85.6 mm; B:68.2 mm; A:57 mm; Weight:6.21 kg; Recommended tightening torque for set screw:16.8 Nm;

B:30.2 mm; J:105 mm; Dz:95 mm; G:R1/8"; B1:43.7 mm; A1:13 mm; A:40 mm; C0:20.8 kN; s1:33.4 mm; d1:62 mm;

A4:39 mm; s1:50 mm; Recommended tightening torque for set screw:16.8 Nm; d:50.8 mm; C:71.5 kN; J:140 mm; T max.:100 °C; N:23mm; A:52 mm; L:185 mm;

A:38 mm; N:M10; C0:11.2 kN; Z:52.3 mm; C:19.5 kN; H1:11 mm; d:28.58 mm; S:15.9 mm; B:38.1 mm; L1:22 mm;

Designation of housing:PG204N-; J:49 mm; s1:15.5 mm; H:33.3 mm; Weight:0.58 kg; C:12.8 kN; N:M8; L:70 mm; T min.:-20 °C; Designation of bearing:UC203G2L3;